Power Over Ethernet
Factory focus on PoE Switch , PoE Module , PoE Splitter , PoE Injector , PoE Cable.

AG9200 10/100/1000Mbps Development board IEEE802.3af 12V/1A 5V2.4A can choose POE module SDAPO DP9200

AG9200 10/100/1000Mbps Development board IEEE802.3af 12V/1A 5V2.4A can choose POE module SDAPO DP9200

  DP9200

Products Description

You are welcome to customize the POE modules of various sizes and appearances and function.The layout is required to receive the initial research and development expenses.After ordering a certain number of modules (usually 5000 pieces), the r&d cost can be deducted.After the sample is qualified, batch production.

DESCRIPTION
5V, 13W PD(Powered Device) Integrated Module (Isolation Type)

FEATURES
* Fully supports IEEE802.3af
* Small Single In-Line (SIL) package size –56mm (L) x 14mm (H)
* Input Voltage Range 37V to 57V
* Support PoE applications in both of Fast / Gigabit Ethernet environments.
* Short Circuit Protection
* Over-temperature Protection
* Programmable Classification (Default:Class 0)
* High Efficiency
* Isolation level 1.5KVrms.
* Easy Installation and Low Cost (Isolation Type, Minimum External Devices required)
* Low Output Ripple and Noise
* Adjustable Output Voltage
* 1500Vrms Isolation (Input-Output)

PIN ASSIGNMENT

1

VIN+

POE Direct Input +. This pin connects to the positive (+) output of the input bridge rectifiers (internally connected to pin 3).

2

VIN-

POE Direct Input -. This pin connects to the negative (-) output of the input bridge rectifiers (internally connected to pins 4
and 5).

3

VIN+

POE Direct Input +. Internally connected to pin 1.

4

VIN-

POE Direct Input -. Internally connected to pin 2.

5

NC

NC. Do not connect to this pin.

6

NC

NC. Do not connect to this pin.

7

-VDC

Negative DC Output. The ground return for the +VDC output.

8

+VDC

Positive DC Output. This pin provides the regulated output from the DC/DC converter.

9

ADJ

Output Adjust. The output voltage can be adjusted from its
nominal value, by connecting an external resistor from this pin to either the +VDC pin or the -VDC pin.

10

NC

NC. Do not connect to this pin.

TYPICAL SYSTEM DIAGRAM

TEST DATA

Model

Input Voltage(after bridge)

Input Current

Output Voltage

Output Current

Efficiency

Ripple Output Noise


V

mA

V

A

%

mV

DP9200

50.39

284

5.0

2.5

87.52%

150


50.5

226

5.0

2

87.79%

120


50.48

170

5.0

1.5

87.57%

95


50.58

115

5.0

1

86.13%

75


50.68

60

5.0

0.5

82.38%

50


50.91

8

5.0

0

0.00%


ELECTRICAL SPECIFICATIONS

No.

Parameter

Symbol

Min

Typical values

Max

Unit

1

Input Voltage

Vin

37


48


57

V

2

output voltage

+VDC

4.9

5

5.1

V

3

output Current

PWR

0.05

2

2.6

A

4

Isolation Voltage

VISO


1.5


KV

5

Ripple Output Noise

VRN


120


mVp-p@2A

6

Storage Temperature

Tj

-40

25

85

7

Operating Temperature

Tstg

-40

25

80

INQUIRY

Top